Back to Blog
Solvents1 September 20263 min read

Pharmaceutical Solvents: Types, Uses, and Safety Guidelines

By Manik Singal, Director, Mediwell Pharmacia · Updated 14 November 2026

ICH Q3C solvent classes, what common pharma solvents are used for, why DEG and EG testing matters, and how to store solvents safely.

Solvents appear in pharmaceutical manufacturing in two quite different roles. Process solvents, such as isopropyl alcohol (IPA) or methylene chloride, are used to granulate, coat or clean and are then driven off; only traces should remain. Vehicles and co-solvents, such as glycerin, propylene glycol, sorbitol solution and PEG 400, stay in the finished medicine as part of the formula. The quality questions for each role are different.

How are residual solvents classified?

The ICH Q3C guideline groups solvents by toxicity and sets limits for what may remain in a medicine:

  • Class 1: solvents to be avoided, such as benzene (2 ppm) and carbon tetrachloride (4 ppm). They should only be used where unavoidable and strictly justified.
  • Class 2: solvents to be limited, each with its own permitted daily exposure. Examples include methylene chloride (600 ppm), methanol (3,000 ppm), toluene (890 ppm) and chloroform (60 ppm).
  • Class 3: solvents of low toxic potential, such as ethanol, acetone, ethyl acetate and IPA (2-propanol). Up to 5,000 ppm (0.5 per cent) is acceptable without further justification.

Q3C applies to residues of process solvents. Glycerin or propylene glycol used as an ingredient is controlled by its own pharmacopoeial monograph instead.

What are common pharmaceutical solvents used for?

  • Isopropyl Alcohol (IPA): granulation fluid, coating solvent and, as a 70 per cent solution, a disinfectant for cleanrooms and equipment.
  • Methylene Chloride (Dichloromethane, MDC): coating and extraction solvent. As a Class 2 solvent its residue must stay within limits.
  • Glycerin: vehicle and sweetener in oral liquids, humectant in creams and plasticiser in soft-gelatin capsule shells.
  • Propylene Glycol: co-solvent in oral liquids, injections and topicals.
  • Sorbitol Solution 70%: sweetening and bodying agent in syrups and suspensions, plasticiser in soft-gel shells.
  • PEG 200, 400 and 600: co-solvents and soft-gel fill vehicles.
  • Polysorbate 20 and 80: solubilisers and emulsifiers.
  • Light and heavy liquid paraffin: emollient, lubricant and base for topical and oral products.

Why is DEG and EG testing so important?

Diethylene glycol (DEG) and ethylene glycol (EG) are cheap industrial chemicals that are toxic to the kidneys. When industrial-grade or adulterated material is substituted for pharmaceutical-grade glycerin, propylene glycol or sorbitol, syrups can become deadly; contaminated cough syrups have been linked to the deaths of children in several countries, including India in 2025.

Indian regulators have responded on several fronts. In October 2025 CDSCO required manufacturers of high-risk pharmaceutical-grade solvents, including glycerin, propylene glycol, sorbitol, low-molecular-weight PEGs, polysorbates and ethyl alcohol, to hold manufacturing licences through the online ONDLS system. The Indian Pharmacopoeia Commission published guidance on testing for DEG and EG by gas chromatography. In October 2026 CDSCO again reminded state regulators that manufacturers must test every batch of these excipients before use.

In practice: buy these solvents only as pharmaceutical grade, from a licensed manufacturer, through a licensed seller, in original sealed packing, with a COA that reports DEG and EG. Then test each batch yourself before use.

How should pharmaceutical solvents be stored and handled?

  • Keep flammable solvents such as IPA in a cool, well-ventilated store away from heat, sparks and direct sunlight, in line with your fire safety and storage licences.
  • Earth and bond drums when transferring flammable solvents to prevent static discharge.
  • Keep containers closed: glycerin, propylene glycol and sorbitol absorb moisture, and volatile solvents lose strength.
  • Label every container with its status (quarantine, approved or rejected) and never refill pharmaceutical containers with other material.
  • Follow the MSDS for personal protective equipment, spill response and disposal.

Which solvents does Mediwell Pharmacia supply?

Our catalogue lists 14 solvents and liquid excipients, including IPA, glycerin, propylene glycol, sorbitol solution 70%, PEG 200, 400 and 600, polysorbate 20 and 80, methylene chloride, light and heavy liquid paraffin, methyl salicylate and chloroform spirit. They are supplied in the manufacturer's original drums or containers with the COA and MSDS. Ask us for the DEG/EG results with your quote.

SolventsPharmaceutical ManufacturingSafetyIPAGlycerin
Share this articleWhatsAppLinkedIn

Looking for Solvents?

Get competitive pricing and complete documentation. We respond within 24 hours.

Request a Quote